Changing License Plate Bulb

Park your vehicle and set the emergency brake.

Changing license plate bulb. Press the assembly toward the front of the vehicle to disengage it and pull it down from the bumper. If you want to replace your license plate bulbs then. I also upgraded the license plate bulb to a LED bulb compatible with 194 or 2825.

Replace the burned out light bulb with a new bulb of the same type. Need to replace license plate bulb on my 2005. Rotate the grey light bulb housing 14 turn.

When electricity is applied to the filament it gets very hot and produces visible light. The latter is usually going to use an access point in the trunk area. 2242020 To replace the one on the front plate nothing could be less difficult you will have to position yourself under the motor vehicle ideally positioned on candles to give you some space and going through the rear of the bumper you will have to unclip the license plate bulb block almost always held by two soft plastic tabs by pressing on both at once then now that you have your license plate bulb.

Open the hatch and stand under it. Replace License Plate Bulb Locate the license plate light assembly in the rear bumper directly above the license plate. 872020 Use a flathead screwdriver to press the license plate light to the right side.

Press the locking button on the plug on top of the light assembly and pull the plug from the assembly. The pair cost 22. In the OFF position.

I thought it would be an easy fix by snapping it all back together but it still remains loose. HOW TO CHANGE A LICENSE PLATE LIGHT BULB-STEP BY STEP PROCEDURE 1. Release the bulb from the contact spring.