Transfer Belt On Printer
Open the front the cover.
Transfer belt on printer. This will secure the belt unit in place. Wait 30 seconds and turn off and on. They must be correctly aligned so.
Use the blue lever callout 1 to lower the secondary transfer assembly. This may damage the transfer unit and cause print quality problems. To the right until they lock.
Although the belt does not need cleaning as often as the other parts like the Drum-Unit the excess toner from cartridges as well as dust. It takes approximately 50 seconds. Although the belt does not need cleaning as often as the other parts like the drum unit the excess toner from cartridges as well as dust.
To release the ITB you might have to pen the rear door and carefully lift up on the sheet-metal portion callout 3. Like most laser printer components a transfer belt needs cleaning to prevent print quality deterioration. Transferring of images requires precise movement of the transfer rollers and transfer belt for the toner.
Clean the ITB slot. Appears in the Printer Status Window and the printer starts cleaning the transfer belt. Lift the ITB as shown below by using the hard-plastic edges of the ITB.
Open the right-door assembly. You press Menu XXXXX 1934 then menu. After removing the ITB unit check it for torn pieces of paper.
