Transfer Board Techniques
Wheelchair to Toilet Transfer Techniques For Wheelchair Transfers involving a wheelchair and toilet.
Transfer board techniques. We recommend having a raised toilet seat with arms a raised toilet seat with arms helps ease this type of wheelchair transfer because it helps the wheelchair user by giving them something to hold onto for support this will allow the transfer to be made with extreme caution and safety. Transfer boards also called sliding boards are an assistive device to help individuals move from one location to another and to prevent slips and falls. To compare the amount of angulation flexion-extension motion that results at the cervical spine during the execution of the log-roll maneuver and the lift-and-slide technique.
For example from bed to chair or from wheelchair to toilet. Attempts should be made to have surfaces be level or to be moving slightly downhill to decrease the effort needed to move between surfaces. The board must be firmly under the thigh and firmly on the surface that the client is transferring towards.
Move into position 2. 11232015 Types of hospital transfers include bed to stretcher bed to wheelchair wheelchair to chair and wheelchair to toilet and vice versa. Banana Transfer Board This Banana Transfer Board is designed to assist in the seated transfer of a patient between two surfaces.
Appropriately setting up the environment is essential to safely complete a sliding board transfer. Unless transferring to the showertub or toilet lower body clothing should be in place to decrease friction. 8112020 Transfer Training Techniques for Different Patient Populations.
This is how to properly transfer a patient using a slide board. The slide board transfer involves either transfering your parapalegic patient from the wheelchair to a bed or from a bed to a wheelchair utilizing a board and often a gate belt. Barbareschi G1 Cheng TJ2 Holloway C1.
Keep your non-amputated leg next to the bed. 9102018 Transferring the Patient When transferring the patient the transfer board should be no higher or lower than one-half inch of the other surface such as a wheelchair and a couch. A repeated-measures design using a cadaveric model was used in this preliminary investigation on the effectiveness of spine-board transfer techniques.
