Transfer Case Fluid Xj

In all-wheel-drive vehicles the transfer case helps to shift power from one axle to another depending upon traction conditions.

Transfer case fluid xj. Tag located on rear case. Whether this is a stock transmission adapter or special transfer case adapter gearbox contamination should not be a concern. Remember there has been a push to longer fluid change intervals.

This is a chain-driven transfer case mounted on the back of the transmission with a driveshaft extending from. In the end I found that just about any 75W-90 GL5 gear oil will do. Transfer Case Fluid NPNV 231 Recommended lubricant for the NV231 transfer case is Mopar Dexron II or ATF Plus 3 type 7176.

So I said no Ill go somewhere else But. NPNV 242 Recommended lubricant for the NV242 transfer case is Mopar Dexron II or ATF Plus type 7176. Tag provides model number serial number and low range ratio.

It may be different in my 2001 XJ. Date of manufacture is the serial number ID. So I cleaned out an old Mobil1 bottle and dumped the fluid in there.

The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the. They can figure out what fluid weight is. Replacing this fluid at appropriate intervals can help prevent premature wear and damage caused by contaminated or broken-down fluid.

However it would only pump a bit more than 34 of the fluid out of the bottle. The fluid in the transfer case serves as both lubricant and helps to keep the internal components cool and turning smoothly. Additionally if the transfer case fluid level is low the entire transfer case should.