Transfer Case Bolts

The image above shows the transfer case fluid draining as well as the fill plug above the drain plug.

Transfer case bolts. Transfer Case Drive Chain. Ford routed the speed sensor wiring running from the transfer case to the controller through the TCM connector. 15 20 Cover Plate Bolts.

Transmission case bolts-----16-25 ft Alternator mount. Transfer Case Shield Bolts. Transfer case to the vehicle.

The transfer case can now be separated by removal of the five retaining bolts. This requires the transfer of the speed sensor pinswires from the original motor to the replacement motor. Remove bolts securing motor to transfer case.

Put your vehicle back to its original condition with this top-notch transfer case component designed to efficiently transmit the engine power to both the front and rear axles through. One set does one mount. The steps below explain how to do the transfer.

Adjusting bolts-----13-21 ft alternator pully bolts-----90-108 in crank pully bolts-----90-108 in rear main seal bolts-----90-108 in water pump pully bolts-----90-108 in oil pan bolts-----84-102 in distributor case bolts-----72-102 in oil pressure switch-----102-126 in. Use new transfer housing case bolts and studs from 4 Wheel Parts to install your new transfer case. NQF CODE TSK1626 TPD PRO-LINE.

This should be an 18mm bolt on the bottom of the transfer case. Our premium parts deliver the power you need to lead the pack. But many times this information has been worn off and subsequently a NP205 gets confused with a NP203 transfer case.