Vinyl Transfer Instructions

5212020 As you peel your transfer tape off the cutting mat your vinyl design will be adhered to it.

Vinyl transfer instructions. Make sure mirror image your design before you hit cut. Pure colors 26 colors Size. Using a scraper tool rub back and forth to adhere the vinyl transfer tape to your design.

Gently pull the vinyl through the machine and line up the left edge of the vinyl with one of the raised vertical lines on the front of the machineout-feed. Peel the vinyl backing away until you are left with just the vinyl design stuck to the transfer tape. If the vinyl sticks to the Transfer Tape simply burnish the vinyl onto the surface again.

8232019 Position your heat transfer vinyl design on your shirt. 6262018 Peel off the transfer tape backing and apply the transfer tape to the vinyl design. Carefully peel away the clear transfer sheet from the vinyl while it is still warm.

Turn the design over so the vinyl backing is facing up. Make sure project surface is clean and dry. Place the matte side UP.

Peel the Transfer Tape away from the vinyl at a 45-degree angle. 9192015 Next you will want to cut your transfer paper roughly the same size as your piece of vinyl. The steps for loading either a roll or a sheet are as follows.

Heat transfer vinyl has a matte side and a shiny side. The second layer is the vinyl film which is the decal itself. 372019 Step by Step instructions for Printable Heat Transfer Vinyl.